UCE-2315-HDM

Specified unit shall be FWE Model No. UCE-2315-HDM, Enclosed Correctional Utility Carts.

CONSTRUCTION. Heliarc welded construction of stainless steel. Welded tubular base frame shall be 1.5" square, heavy gauge stainless steel tubing, with 10-gauge stainless steel reinforcing stress plates at corners. 18 gauge stainless steel exterior.

CASTERS. 8" maintenance-free polyurethane tire casters in a configuration of two (2) rigid and two (2) swivel with brake. Casters shall have a reinforced yoke mounted to 10 gauge caster plate. The caster mounting plate shall be secured to a 10 gauge stainless steel reinforcing stress plate via welded-in-place stainless steel studs. The reinforcing stress plates shall be welded to the heavy gauge tubular frame of the unit.

PUSH BAR HANDLE. Heavy-duty 1" diameter tubular stainless steel push handles. Reinforced and welded with stainless steel channel to prevent removal.

DOORS AND LATCHES. Flush mounted, stainless steel, gasketless door. Each door shall have three (3) non-removable heavy-duty, 12 gauge stainless steel hinges welded to cabinet body. Doors shall open a full 270°, to lay flat against sides of cabinet. Each door shall be equipped with non-removable maxi-guard slide latches, fully welded to cabinet frame, exterior access latch to be mounted within recessed panel and include 12 gauge swing down padlock plate.

SHELVES. Shelf made of heavy-duty 16 gauge stainless steel. Underside of shelf shall be reinforced with 18 gauge stainless steel tubular frame, resting on 12 gauge welded shelf support brackets.

Provide with the following accessories: