Standard Features, Options & Accessories

What makes FWE stand out from the crowd is our ability to modify and morph our products to meet your needs. We have many optional accessories that we can mix and match to get you the perfect piece of equipment.

Our products already come standard with some amazing features before you select any modifications and upgrades. Our unique process allows for endless customization and solutions. We listen to your concerns and build products to solve your unique operational challenges. These custom solutions are quoted quickly at affordable prices. So never be afraid to ask what is possible.

Learn all about these features and optional accessories below.

Over 100 items

The largest selection of Standard Features and Optional Accessories in the industry.

Transport & Heavy Duty Modified Optional Accessories
Add these items to your equipment for additional protection in rigorous environments.

Agency Approvals

FWE is always developing new products, technologies and innovations to meet customers ever changing needs. To make sure our equipment is the best equipment, FWE has it's own test lab.

The lab includes test areas with capabilities to test equipment and controls across a wide range of air temperatures, relative humidity levels, airflow rates, as well as automatic door-opening equipment. This allows us to test our products to ensure we meet the regulatory demands of various agencies.

FWE's products are then sent to a third party for independent testing to verify we meet the food industry's most stringent standards for performance and food safety including CE, Energy Star, NSF or UL EPH and UL.

we offer 8

different Agency Approvals possibilities

The CE mark is mandatory for products sold in the European Economic Area. It indicates the product conforms with certain manufacturing and design safety requirements. CE is similar to UL except it's more of a declaration by the manufacturer that the product meets the relevant rules, rather than being the mark of independent testing.

Most consumers have come to recognize the mark of ENERGY STAR, an agency supported by the U.S. Environmental Protection Agency and Department of Energy, on residential products.

The organization also offers its certification to commercial pieces, still indicating the potential for energy savings below the baseline for that type of equipment. Participation in ENERGY STAR is voluntary for manufacturers and products submitted for certification must go through testing before the seal is given.

Products carrying the Energy Star service mark generally use 20-30% less energy than required by federal standards.

NSF International (formerly known as the National Sanitation Foundation) is an independent, non-profit organization that certifies food service equipment and ensures it is designed and constructed in a way that promotes food safety. FWE products that meet these standards bear the NSF mark.

You may also see a designation that a product meets NSF/ANSI, which adds rules from the American National Standards Institute to the testing. ANSI works closely with NSF to develop its food safety standards and complete testing to those.

The UL mark, which now serves customers in more than 100 countries, has become the authority on product safety. Its engineers test for things like soundness of design, safety of electrical components, and structural integrity of products for which UL listing is sought.

If you think of NSF International classification as protection for your customers, then the mark of Underwriters Laboratories (UL) indicates safety for those who work in your commercial kitchen. The Illinois-based testing agency assures that the equipment that gets its stamp operates safely. There is also a sanitation classification that offers similar assurances about food safety as the NSF mark. Products are indicated as "Classified UL-EPH."

UL EPH recognizes products certified to meet environmental and public health standards. The UL EPH logo shows the word "Classified" above the UL mark, which indicates that the product complies with ANSI/NSF standards, in addition to other applicable codes.

C-UL mark indicates a product meets the CSA testing standards for Canada.

C-UL-US mark indicates a product meets the UL and CSA testing standards for both the United States and Canada.

Bumpers

FWE has been building mobile cabinets since 1953. One of the features that makes FWE unique is the durable stainless steel construction of the base frame. The bumper is mounted to the base frame for added durability - the bumper is not used as the base frame. In this way, the bumper absorbs all the shock in transport, protecting the integrity of the construction.

Most FWE products are standard with a full bumper, however, options are available for those standard without or needing "extra" protection.

we offer 8

different Bumpers possibilities

Heavy duty full perimeter bumper extends beyond doors and handles for added protection. The bumper is mounted to the base frame for added durability - the bumper is not used as the base frame. In this way, the bumper absorbs all the shock in transport, protecting the integrity of the construction.

Top mounted heavy duty full perimeter bumper extends beyond doors and handles for added protection during transport.

Top corner bumpers are a good option for those customers not needing the protection of a full bumper, but still require protection for walls and surrounding equipment.

Super duty full perimeter bumper is wider and thicker than our standard perimeter bumper. This is a good option for frequent transport or correctional environments.

Super duty full perimeter bumper is wider and thicker than our standard perimeter bumper. Carriage bolts are installed to prevent the bumper material from being removed. This is a good option for frequent transport or correctional environments.

Heavy duty full perimeter bumper with a narrow profile. Intended for customers with narrow door ways or tight footprints. Best when used with rear push pull handles or side recessed hand grips.

No bumper

Caster

Many things factor into choosing the perfect caster. Such as floor conditions, operating environment, temperatures and terrain. FWE has many caster options to fit your specific operational needs.

we offer 11

different Caster possibilities

6 caster configuration increases the cabinets maneuverability, ideal for larger cabinets

FWE offers a wide variety of adjustable legs for when casters are not an option. 4" and 6" adjustable legs are available on almost all of FWE's equipment.

All adjustable legs are provided with sealed precision bearing with a black anti-rust coating.

All swivel casters allow for greater maneuverability. Great for tight turns or severe corners (such as on and off trucks or narrow hallways).

A drawback to the all swivel configuration is that it is harder to control the direction of the equipment when rolled in a straight line.

Undercarriage lock-down keeps mobile equipment securely in place by gently lifting the unit high enough so the casters do not touch the ground.

Must be used with 6" casters.

1" non-skid rubber feet help keep the cabinet in place

The Master caster is the best all-around caster for FWE products. Having the highest load bearing weight the Master Caster can handle any piece of FWE product. With easy maneuverability and silent rolling, the Master Caster will not stop when there is a small obstruction or uneven terrain. The Master Caster is also resistant to corrosion from chemicals, water, and steam.

These casters are designed for cart wash applications. Better on brick, concrete, tile, asphalt and wood.

The delrin bearing provides corrosion resistance to chemicals, water and steam. They are a smooth and quiet rolling caster on hard and uneven surfaces.

Available in 5", 6" and 8" diameters.

The EZ Roll Casters are standard on FWE cabinets and provide moderate floor protection with a high weight capacity.

EZ roll casters are shock absorbing and roll easier under heavy loads.

Available in 5", 6" and 8" diameters.

These all terrain sturdy cushion round tread casters are best for concrete, tile and asphalt locations.

Considered to be the best choice for the most demanding operations and satellite applications. These caster combine the cushioned ride of a full pneumatic with the easier roll of a hard tread.

Available in 6" and 8" diameters.

Semi-Pneumatic caster are made of hard rubber with a hollow core. These caster are best suited for carpeted areas.

A semi-pneumatic casters has no inner tube, so the ride is not as "cushioned" as a full pneumatic caster.

Available in 6" and 8" diameters.

Control Panel

Commercial foodservice equipment controls designed for simplicity, precision, and consistency. FWE control panels make it easy to set, monitor, and maintain the temperatures and conditions your operation requires. Our selection of controls for various heat systems include electronic and mechanical controls, digital temperature displays, programmable timers, temperature alarms, recipe settings, humidity controls, and more.

From heated holding cabinets and cook-and-hold ovens to refrigeration, proofing, and rethermalization equipment, FWE offers control panel options tailored to your application. Intuitive, easy-to-read controls help reduce training, simplify operation, and deliver consistent food quality from batch to batch.

we offer 19

different Control Panel possibilities

Intuitive controls are easy to use and highly accurate, and oversized, high demand components assure rapid pull down times and recoveries. Set range 33F - 40F (1C - 4.4C)

Electronic controls featuring easy to read digital display of cabinet temperature (with recall capacity of temperature set point and actual cabinet temperature), equipped with a programmable low temperature alarm, master ON/OFF switch with power indicator light.

Controls are up-front, easy to read and set, and include a full range F/C thermostat for easy operation. Thermometer continuously reads cabinet temperature - even without power source!

Easy to use - upfront and recessed electronic control panel has separate, easy to read and set, air moisture and air temperature controls

Easy to use - upfront and recessed electronic control panel has separate, easy to read and set, air moisture and air temperature controls

Controls are up-front, easy to read and set, and include a full-range Fahrenheit/Celsius thermostat for easy operation

Intuitive, easy to use and kitchen friendly controls allow for 8 programmable recipes for consistent results. Provided with an internal product probe, allows for options to cook and hold by probe or by time without constant monitoring.

Easy controls - simply use the master ON/OFF switch and select your temperature setting anywhere from 90 - 190

Intuitive controls are easy to use and highly accurate, and oversized, high demand components assure rapid pull down times and recoveries. Heat Mode and Cold Mode change with press of a button

Exclusive Dual-Temp recessed electronic controls with digital display. Controls are
up-front, easy to read and set

Solar digital thermometer

Controls shall include a master ON/OFF switch with power indicator light. Adjustable temperature range from 150°F to 200°F (66°C to 93°C). Factory pre-set to 170°F (77°C).

Touch screen controls allow for shelf timers and HACCP data collection via USB port.

Adjustable control knob with OFF position and numbered heat settings from low to high.

Mechanical controls

Simple to use - user-friendly, easy to read, easy to set, color-coded controls allow you to set the unit from 0% - 90% relative humidity and 90F - 200F. Equipped with low water and temperature alarms

Simple to use electronic control, user friendly, easy to read and easy to set. Provided with low temperature alarm. Set range 90F - 190F (32C - 88C)

Easy to use controls allow the operator to preset the time and temperature of the cooking cycle, as well as the holding temperature, eliminating the need for constant monitoring

Door Hinge

we offer 7

different Door Hinge possibilities

Heavy-duty edge mount die cast hinges

Lift off hinges - door swings 270 degrees and lifts off for thorough cleaning

Heavy duty pin style hinges

Full length piano door hinge for added durability

Snap-lock hinges stay open to free up hands

Concealed Adjustable Hinges

Stainless Steel Hinges

Door Latch

Choose the door hardware that best fits your application. FWE offers a variety of latches designed for easy operation, secure closure, transport, locking and security, and other specific needs.

we offer 11

different Door Latch possibilities

Edgemont door latch, full grip and positive closing

Heavy duty door latch with key locking capabilities

Heavy duty full grip magnetic door latch

Magnetic work flow door handles ergonomically accommodates kitchen staff and servers of varying heights

Recessed paddle style door latch

Cabinet mounted latch keeps door secure during transport, increased security with padlocking capabilities

Standard recessed Antimicrobial Sani guard door handle - detains illness causing pathogens

Recessed Maxi-Slide padlock assembly keeps padlocks protected during transport. The assembly is sized for medium correctional padlocks.

Doors

we offer 12

different Doors possibilities

Dutch doors help maintain cabinet temperature during peak serving times

Flush mounted, stainless steel insulated french style doors help maintain cabinet temperature during peak serving times

Full view glass doors allow complete visibility of product without opening the door, available in full and Dutch

Pass-thru doors create a convenient connection from preparation side to serving areas. With access from both sides of the cabinet staff is free to focus on customers, taking more orders and serving carry-outs during peak meal times

See-thru lexan door provides high visability for hot and fresh items

Sliding space saver door tucks compactly into the side of the unit

Adjustable door vents; allows desired holding conditions from moist to crisp foods, achieving optimal results

Flush mounted, stainless steel insulated doors

Gasket sealed door; tight double seal makes for a perfect secure closure and easy to clean

Flip-up Lexan door with snap-lock hinges stay open to free up hands. Flip-down Lexan door snap-locks open for easy loading, serving and refilling

No doors - open storage

Electrical

Whether you're outfitting a commercial kitchen, serving line, catering operation, or other foodservice environment, FWE provides flexible electrical configurations to make installation and everyday operation straightforward.

we offer 9

different Electrical possibilities

220-240 Volt

Bottom mounted compressor assembly and heavy-duty design integrated casters provide low center of gravity - allows for easy and safe transporting

High-efficiency, condensing unit and coil assures rapid "pull down" and recovery

High Output Models use a 240 thermostat and a higher wattage element to ensure the desired temperature is maintained during max serving times.

Continuously intuitive self-defrosting cold system with on demand override - makes operation convenient and user-friendly

Upgraded Element

Keep track of your tasks with the reliable mechanical timer. This classic wind-up timer requires no batteries and offers precise countdown functionality for cooking, baking, and more. With a simple twist, set the time and ensure you stay on schedule.

Recessed tri-direction cord pocket - allows for compact fit

Extra

The right details can make a big difference. FWE offers a variety of additional options and accessories to help customize equipment for the unique needs of your operation. From practical accessories and storage solutions to mobility, protection, and other application-specific options, these extras make it easier to configure FWE equipment around your workflow.

we offer 16

different Extra possibilities

Keep cold foods cold during transport with FWE's heavy duty cold plate cartridge

Cabinet mounted brackets allow for cord to be wrapped and out of the way when not in use

One year parts, six months labor limited warranty

Drain Plug

Door mounted dry erase board for menu changes or cabinet identification

Removable humidity pan: 12" x 20" pan provides large water reservoir - removable, easy to clean and replace

Door mounted frame to display menu card

Passive humidity pan; provided to add optional humidity to cabinet environment and to prevent drying out food, improving food quality

Carriers for covered and uncovered plates for easy loading and delivery

HDM security packages can be added to select cabinets to help increase the security and durability of your unit

Two year limited warranty

Use your cabinet as a bill board! Catch the eye of your customer with your custom logo, message, or menu item images with a graphic wrap.

Lightweight plastic black bins that fit into sharing station carts.

Graphic magnet ordered to your specifications to fit onto the magnetic backboard optional accessory for sharing stations speed lines.

Handles

we offer 8

different Handles possibilities

Ergo-drop down handle

Push/pull handles allow for easy maneuvering. Handles are secured to the unit with reinforced backing plate. Ergonomically designed to be easy on the hands

Rear tubular push handle

Recessed antimicrobial hand grips detain illness causing pathogens

Flush in wall hand grips recessed and mounted on the left and right side of the unit

Drop down handles allow full grip for lifting and transport - easy to transport for catering applications

Heavy duty stainless steel push pull handles are secured to the unit with reinforced backing plate. Ergonomically designed to be easy on the hands

Designed for ease of push / pull during transport and recessed for protection.

Heat System

we offer 21

different Heat System possibilities

Refrigerated air screen maintains below 41° during open door operation

Bottom electric heat source heats cabinet evenly throughout. Maintain heat unplugged with canned fuel safely in drawers.

Heat source with passive humidity circulates heat evenly throughout cabinet.

High performance - low technology. Provide the best food quality from amplified heated moisture for short-term holding applications.

Heated holding some menu items, such as chicken, will become steamed or soggy by using a covered pan. When exposed to dry heat, uncovered, these items become dry and rubbery. Achieve best results with controlled moisture. The length of holding time is also extended.

Proofer and amplified moisture heated holding. Built-in humidity system balances moisture and
air with controlled heat and humidity capabilities - allows for greater control of holding food
environment for longer holding periods

FWE's natural convection heat system allows a soft heat to radiate throughout the compartment. Heat rises naturally and circulates from bottom to top without blowers. Radiant heat is best suited for short term heated holding.

Large air circulation top heat source provides open bottom base

Gentle air circulation reduces product shrinkage, maintains high product yield. Precision accurate temperature cooking by product probe or time mode. Save on valuable hood space. No outside venting or hoods required. Local codes prevail.

Continuously intuitive defrost system with on demand override shall have heavy-duty fan circulation evaporator coil, 1/4 HP air-cooled closed system, Hi-torque condensing unit with thermal expansion valve, filter-dryer, pressure control and condensation lines and pan.

Serving wells are individually controlled with a temperature range of 90° to 190°F (32° to 88°C)

Ultimate foodservice flexibility - change cabinet from heated mode to refrigerated mode as your food service holding needs change

85% radiant and 15% forced air convection. Combining radiant and convection heat allows meats to brown naturally and greatly reduces product shrinkage by as little as 4%. Precision accurate temperature cooking by product probe or time mode. Save on valuable hood space. No outside venting or hoods required. Local codes prevail.

85% radiant and 15% forced air convection. Combining radiant and convection heat allows meats to brown naturally and greatly reduces product shrinkage by as little as 4%. Precision accurate temperature cooking by product probe or time mode. Up to 4 hours of smoking in the "smoke drawer" using wood chips.

Achieve extended holding times with controlled moisture. Provide the best food quality from precision heated moisture for either long-term or short-term holding applications. Precision heat and humidity achieved by a unique push/pull air distribution system to provide uniform temperature and humidity on every level, throughout the unit

Built-in heat system with uniform low watt density radiant heat source that creates highly accurate temperature tolerances throughout the cooking and holding functions. Minimal air
movement offers uniform and consistent cooking, low shrinkage, and higher food yields of bulk or portion items, higher food moisture content, and significantly longer food holding life. Heat system provides fast heat up, recovery and accurate temperature set points.

Radiant heat featuring a blanket heating element system.

This heat system uses longwave infrared elements to maximize the hold times of crispy, fried, and wrapped foods such as fried chicken, french fries, onion rings, etc. The long-wave infrared elements are positioned to keep the product within the ideal range to keep the outside coating crisp while maintaining the internal temperature and moisture of the items.

Fan-cooled blower motor for heated air distribution

Ultimate foodservice flexibility - change cabinet from freezer mode to refrigerated mode as your food service holding needs change

Full cabinet air circulation for high volume heating and finishing prepared foods. No venting hood space required for most local codes

Simultaneously hot and cold. Cabinet divided into two sections - dual purpose cabinet holds hot and cold food

Hinging

we offer 6

different Hinging possibilities

Alternate door swing configurations are available for multi door cabinets

Field reversible door- flexible installation options for kitchen layout

Center hinging allows door to lie flush when open

Left hand door hinging, available on single door models only

Hinges on the right and left side

Right hand door hinging

Bars

we offer 25

different Bars possibilities

BAG-IN-BOX SYSTEM handles the soft drink just like the POST-MIX system, but the syrup is provided in 12'' square boxes instead of 5 gallon cylinder shaped tanks. The same equipment lines, gun, and carbonator are required as in other systems, plus an additional pump per flavor. Less storage space is required and each box is discarded after use. Dispensing equipment is provided by FWE only when ordered as an optional accessory.

Durable laminate finish. Several laminate choices to choose from. Standard selections are Fusion Maple, Fonthill Pear, New Age Oak, Golden Oak, Wild Cherry, Biltmore Cheery, Versailles Anigre, Black. Laminate samples are available upon request. Custom laminates and tops are also available to enhance or match existing colors.

Towel ring shall be mounted to working side.

4.25" deep, heavy gauge stainless steel full length bottle speed rail; removable without tools.

Custom stains are available on FWE solid wood bars to enhance or match existing decor and furnishings.

Constructed entirely of stainless steel, these attractive and functional bars are tough enough to be used year-round, and beautiful enough to grace the most elegant banquet hall.

Lockable doors prevents unauthorized access to storage areas for safety and security.

Bar gutters conveniently store accidental spillage for easy cleaning.

POST-MIX SYSTEM mixes the water, carbonation, and syrup at the point of dispensing. The water from 5 gallon tanks passes through the carbonator, creating soda water. This soda water is then mixed with the concentrate syrup from 5 gallon syrup tanks. Dispensing equipment is provided by FWE only when ordered as an optional accessory.

Paper towel dispenser

Laminate bar top with an over-sized mahogany wood "Chicago Arm" surround

Sealed in cold plate keeps 6 flavor circuits of beverages chilled for service with 50lb ice bin capacity and stainless steel sliding cover

Insulated ice sink with stainless steel sliding cover and sink drain. Sink has enclosed foam insulation and a 60lb ice capacity.

Black laminate top with bull-nose rounded corners

Stainless steel work top with bull-nose rounded corners.

Durable laminate finish. Several laminate choices to choose from. Standard selections are Fusion Maple, Fonthill Pear, New Age Oak, Golden Oak, Wild Cherry, Biltmore Cheery, Versailles Anigre, Black. Laminate samples are available upon request. Custom laminates and tops are also available to enhance or match existing colors.

FWE's built in hand sinks are perfect for hosting an event in any location, making it possible to offer practical hand washing wherever it is needed. Water heater with adjustable thermostat quickly warms water for dispensing when needed.

Made from solid birch wood featuring classical architectural elements from old world craftsmanship. Built from real wood and finished in catalyzed lacquer to deter scraching and gouging.

Made from solid mahogany wood featuring classical architectural elements from old world craftsmanship. Built from real wood and finished in a rich, traditional cherry stain.

Vertical stainless steel corner guards help protect laminate from chips in high impact areas.

Lockable 5" deep removable speed rail keeps bottles readily available for quick service.

Our custom protective storage covers are meticulously crafted to seamlessly fit our bars, ensuring a snug and tailored appearance. Fabricated from durable 20 mil clear vinyl, these covers offer exceptional clarity and protection, safeguarding the integrity of your bars while allowing their aesthetic appeal to shine through. Designed with precision and quality in mind, our covers provide a reliable solution for preserving and enhancing the presentation of your bar assets.

Custom laminates tops are available to enhance or match existing colors.

Stainless steel condiment holder keeps drink garnishes readily available

  If you can dream it, we can build it.
  Cook | Hold | Transport | Serve | Refrigeration | Bars

  If you can dream it, we can build it.
  Cook | Hold | Transport | Serve | Refrigeration | Bars

Food Warming Equipment Company, Inc.

5599 Highway 31W
Portland, Tennessee 37148

Food Warming Equipment Company, Inc.

5599 Highway 31W
Portland, Tennessee 37148

FWE, A Hatco Company

© 2025  FWE / Food Warming Equipment Company, Inc. Owned and operated by Hatco Corporation. All Rights Reserved.
Cookie Policy | Do Not Sell My Personal Information | DMCA Policy | Privacy Policy | Terms & Conditions of Sale | Top of Page

Food Warming Equipment Company, Inc.
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.