AS-IC-200
Mobile Ice Carts
200lb Capacity Insulated Ice Storage Cart
"IC" Series
Model may differ from the image(s) shown.
Model may be shown with Optional Accessories.
Please Consult Factory.
AS-IC-200, portable ice cart. Holds 200 lbs of ice. Perfect companion piece for the AS series bars.
EZ roll casters are shock absorbing and roll easier under heavy loads.
Available in 5", 6" and 8" diameters.
A drawback to the all swivel configuration is that it is harder to control the direction of the equipment when rolled in a straight line.
Specified unit shall be FWE Model No. AS-IC-200, Mobile Ice Carts.
CONSTRUCTION. IC, ES-IC, and AS-IC models: Heliarc welded, single unit construction shall consist of welded stainless steel base frame of heavy gauge 1" square stainless steel tubing with extra 10 gauge stainless steel caster corner plate reinforcements. SIC model: heavy duty stainless steel support channels with 10 gauge stainless steel caster corner plate reinforcements.
FINISH MATERIALS
SIC Series: Shall be stainless steel, heliarc welded; ground and polished. Full length, heavy gauge stainless steel angles reinforce corners of body on inside, with high-impact edging on outside corners.
IC Series: Side panels shall be high-pressure, dual-side counter-balanced laminate .75" thick finish. Laminate selections are available. Full length, heavy gauge stainless steel angles reinforce corners of body on inside, with high impact edging on outside corners.
ES-IC Series: Classic raised solid maple wood panels. All wood surfaces finished with polymer coating to deter scratching and gouging. Constructed with reinforced joints for additional strength and durability.
AS-IC Series: Classic raised solid mahogany wood panels. All wood surfaces finished with polymer coating to deter scratching and gouging. Constructed with reinforced joints for additional strength and durability.
CASTERS. Maintenance free polyurethane tire casters, all swivel with brake. Casters shall have a reinforced yoke mounted to 10 gauge caster plate. The caster mounting plate shall be secured to a 10 gauge stainless steel reinforcing stress plate via welded in place stainless steel studs.
INSTALLATION. Unit should not be installed in an area where adverse environmental conditions are present.
Provided with the following accessories:
FWE products may be covered under one or more of the following U.S. patents: 288,299;238,300;3,952,609;4,192,991.
All rights reserved. All specifications subject to change without notice.
Errors subject to correction. © 2023 FWE / Food Warming Equipment Company, Inc.
Shop online at FWEparts.com for replacement parts directly from FWE.
See terms of sale & limited two year warranty.
Also, register your product today!
Find your local independent parts & service agent.
Bulk Food Heated Holding Cabinets
Moisture Holding Cabinets
Proofer / Heater Cabinets
Heated Holding Shelves
Banquet Cabinets
Low Temp Cook & Hold Ovens
Smokers
Retherm Ovens
Refrigerators, Air Screens & Freezers
Racks & Queen Mary
Tray Delivery Carts
Enclosed Non-Heated Transport Carts
Mobile Bars & Back Up Service
5599 Highway 31W
Portland, Tennessee 37148
5599 Highway 31W
Portland, Tennessee 37148
© 2023 FWE / Food Warming Equipment Company, Inc. Owned and operated by Hatco Corporation. All Rights Reserved. Terms & Conditions of Sale | Privacy Policy | Do Not Sell My Personal Information | Top of Page